Emission Control Swirl Valve Solenoid Mitsubishi PAJERO 4m41 Genuine

Swirl Control Solenoid Valve. P1130 Swirl Control Valve Control Solenoid Valve Maxima Forums When the solenoid control signal is grounded ("on"), the solenoid val Cause: Swirl control valve connector is damaged, loose or shorted; Swirl control valve control circuit is open or shorted to ground; When the ECM sends an ON (ground) signal, the solenoid valve is bypassed to apply intake manifold vacuum to the swirl.

The automobile fault code P1130 indicates a problem with the swirl control valve in the engine But hey, its easy enough, so first off, pop the radiator cap off and check the coolant level

Y16 0104 NISSAN PATHFINDER VACUUM SWITCH SWIRL CONTROL VALVE SPDB28

When ECU activates solenoid, manifold vacuum passes through solenoid to swirl control This can be identified by the Engine Light or Service Engine Soon Warning Light turning on The automobile fault code P1130 indicates a problem with the swirl control valve in the engine

DTC P1130 Swirl Control Valve Control Solenoid Valve Description PDF. If the only code you have is the P1130, then the likely cause of the problem is just as the code reader says, the "Swirl control valve solenoid valve" which is the part I have listed. But hey, its easy enough, so first off, pop the radiator cap off and check the coolant level

EMISSION CONTROL SWIRL VALVE VACUUM SOLENOID Grelly UK. The solenoid valve controls swirl control valve's shut/open condition The swirl control valve control solenoid valve responds to signals from the ECM